Updated Nov 19, 2026· 10 min read

Key takeaways

  • Compare the best smart water shutoff valves, from inline monitors to clamp-on valve robots, with specs on fit, wireless range, power, and hub needs.

A smart water shutoff valve does the one thing a leak sensor alone cannot: it closes your main water line automatically when something goes wrong, so a burst pipe or failed hose stops flooding your home even when nobody is there. The short answer is that the Moen Flo is the most complete single device here, because it monitors flow and pressure inline and shuts the water off by itself. If cutting into the pipe is not an option, a clamp-on valve robot such as the Zooz Titan or EcoNet Bulldog turns the ball valve you already have, and the YoLink controller covers homes where the main shutoff sits far from the house network.

As an Amazon Associate, we earn from qualifying purchases.

Every pick below is a real, currently sold product, and the five designs split into two families. Inline monitors install in the water line and watch flow, pressure, and temperature continuously. Valve robots and actuators mount over an existing quarter-turn ball valve and simply turn the handle for you. Which family fits depends on your plumbing, your smart home platform, and how much installation work you accept.

Table of Contents

Quick Picks

  • Best inline monitor and shutoff in one: Moen Flo Smart Water Monitor and Shutoff (900-001)
  • Best for long range and remote buildings: YoLink Smart Water Valve Controller with EVO Valve Operator
  • Best Z-Wave clamp-on actuator: Zooz Titan Water Valve Actuator ZAC36
  • Best for larger ball valves: EcoNet Controls Bulldog Valve Robot
  • Best simple Z-Wave retrofit: Dome Home Automation Water Main Shut-Off (DMWV1)

Moen Flo Smart Water Monitor and Shutoff

Check price on Amazon

The Moen Flo is a premium-tier inline device that a plumber installs directly in the main line, where it combines a flow meter, pressure sensor, and temperature sensor with a motorized shutoff valve in a single unit. Because it watches the water itself rather than waiting for a floor sensor to get wet, it can flag micro-leaks, running toilets, unusually high flow, and freeze-risk conditions, then close the valve automatically or from the Flo by Moen app.

Specs

  • Model: 900-001
  • Pipe size: 3/4-inch main line (other sizes exist in the same family)
  • Connection: Wi-Fi, controlled through the Flo by Moen smartphone app
  • Sensing: flow rate, water pressure, and temperature monitoring with daily system health checks
  • Shutoff: motorized valve with automatic and remote manual control
  • Voice control: works with Amazon Alexa and Google Assistant
  • Power: plug-in power supply with a battery backup option from the manufacturer
  • Installation: inline installation in the water line; professional installation recommended by Moen

The Flo suits homeowners who want one device that both detects and responds, with usage reporting broken down in the app. The trade-offs are the inline installation, which usually means hiring a plumber, and the need for a power outlet and a solid Wi-Fi signal near the main line. Homes with a 1-inch or larger main should look at the matching size in the same Flo family rather than forcing this 3/4-inch model.

Check price on Amazon

YoLink takes the opposite approach to range. Its system uses LoRa radio instead of Wi-Fi, which the manufacturer rates for up to a quarter mile of open-air range, so the controller can reach a meter pit, pump house, or detached garage that Wi-Fi never touches. The EVO valve operator mounts over an existing quarter-turn ball valve and turns it on command, with no pipe cutting and no plumber required for a typical install.

Specs

  • System: YoLink Valve Controller paired with the EVO motorized valve operator
  • Wireless: LoRa long-range radio; YoLink Hub required (sold separately or in kits)
  • Valve fit: standard quarter-turn ball valves in common residential sizes
  • Controller power: 4 AA batteries (included) or optional plug-in adapter
  • Offline behavior: device-to-device pairing lets a YoLink leak sensor close the valve even if the internet is down
  • Smart home links: Amazon Alexa, Google Assistant, IFTTT, and Home Assistant integrations
  • Control: YoLink app for remote open and close, schedules, and alerts
  • Installation: clamp-over retrofit on the existing valve handle; no plumbing changes

This is the mid-range pick for rural properties, large lots, and anyone whose shutoff lives in an awkward spot far from the router. The main caveat is ecosystem lock-in: the valve only talks to YoLink’s own hub and sensors, so it makes the most sense if you are willing to build your leak protection inside that one system.

Zooz Titan Water Valve Actuator ZAC36

Check price on Amazon

The Zooz Titan is a clamp-on actuator for people who already run a Z-Wave smart home. It drops over the handle of an existing ball valve, calibrates itself to that valve’s open and closed positions, and turns it with a strong motor. Unusually for this category, it includes a wired leak probe in the box, and the probe can trigger a shutoff on its own, even if your hub is offline at that moment.

Specs

  • Model: ZAC36 (700 Series)
  • Wireless: Z-Wave Plus and Z-Wave Long Range; a Z-Wave hub is required for remote control
  • Valve fit: quarter-turn ball valves from 1/2 inch to 1-1/4 inch; not for gate valves
  • Torque: 6 Nm motor with automatic calibration to the installed valve
  • Leak detection: wired leak probe included; probe contact closes the valve without hub involvement
  • Weather rating: IP66 for indoor or sheltered outdoor mounting
  • Power: plug-in adapter with a 9.5-foot cord; optional backup battery sold separately
  • Dimensions: 5.5 x 2.25 x 5 inches
  • Hub compatibility: SmartThings, Hubitat, Ring Alarm, Z-Box, and other Z-Wave controllers

The Titan is the strongest fit for Home Assistant and Hubitat users who want local control that does not depend on a vendor cloud. Remember that it is a US-frequency Z-Wave device, and it still needs mains power at the valve location, so an outlet near the shutoff is part of the plan.

EcoNet Controls Bulldog Valve Robot

The Bulldog Valve Robot from EcoNet Controls is the long-running Z-Wave Plus retrofit option, and its headline advantage is size coverage: the rigid bracket and high-torque motor handle ball valves up to 1-1/2 inches, larger than most clamp-on rivals manage. It mounts over the existing valve with no plumbing work and opens or closes the valve in about 18 seconds, per the manufacturer’s published figures.

Specs

  • Model: EVC200-HCSML
  • Wireless: Z-Wave Plus certified; a Z-Wave hub is required
  • Valve fit: quarter-turn ball valves in 3/4, 1, 1-1/4, and 1-1/2 inch sizes
  • Actuation time: about 18 seconds to open or close, per EcoNet Controls
  • Power: plug-in AC adapter included
  • Hub compatibility: SmartThings, Hubitat, Nexia, Control4, Honeywell, Ring, and other Z-Wave controllers
  • Leak response: pairs with Z-Wave water leak sensors for automatic shutoff rules
  • Installation: bracket mounts over the existing valve; no pipe cutting

Choose the Bulldog when your main valve is one of the larger sizes, or when you want the retrofit design with the longest track record in the Z-Wave world. This listing is the robot on its own, so plan on separate Z-Wave leak sensors if you want fully automatic shutoff rather than app control alone.

Dome Home Automation Water Main Shut-Off

The Dome Water Main Shut-Off, model DMWV1, is the budget-tier Z-Wave retrofit: a motor assembly and control arm that clamp over a standard ball valve with basic tools. It covers the widest valve range of the clamp-on picks here, and because it is mains powered it also works as a Z-Wave signal repeater, which can help a hub reach a basement mechanical room.

Specs

  • Model: DMWV1
  • Wireless: Z-Wave Plus (500 series); a Z-Wave certified hub is required
  • Valve fit: quarter-turn ball valves from 1/2 inch to 1-1/2 inch
  • Range: up to 150 feet, and the unit repeats Z-Wave signals for other devices
  • Power: 12V DC plug-in supply; manual override lets you work the valve by hand
  • Dimensions: 2.5 x 3.5 x 6 inches
  • Use: indoor installation
  • Warranty: 1-year limited warranty

The Dome unit suits smaller budgets and straightforward installs on standard valves. Its body is plastic and its motor is slower than the Zooz and EcoNet designs, so it fits best as a basic actuator inside an existing Z-Wave setup rather than the centerpiece of a new one.

How to Choose

Inline monitor or clamp-on robot. Inline devices like the Moen Flo see every drop that moves through the main line, so they can detect hidden leaks, track consumption, and notice freeze risk. Clamp-on robots only turn the valve; they depend on separate leak sensors to know when to act, but they install in minutes and leave your plumbing untouched.

Check your valve before anything else. Every retrofit pick here needs a quarter-turn ball valve with a lever handle. If your main shutoff is an old round-handle gate valve, a plumber has to swap in a ball valve first, and that changes the cost and effort of the whole project. Measure the pipe size too: the clamp-on range tops out at 1-1/4 inches for the Zooz Titan and 1-1/2 inches for the EcoNet Bulldog and Dome units.

Match the radio to your home. Wi-Fi models need a strong signal at the water main, which is often the worst spot in the house for coverage. Z-Wave models need a compatible hub but keep control local. YoLink’s LoRa system reaches the farthest by a wide margin, at the cost of a dedicated hub and a single-brand sensor ecosystem.

Plan for power and outages. Inline monitors and valve robots all need electricity to move. Check whether an outlet exists near the shutoff, look at cord length, and decide whether a battery backup option matters to you. Also confirm the valve can still be operated by hand, because a manual override is what saves you during a long outage.

Sensors complete the system. A shutoff valve that only closes from an app still leaves you exposed when a hose bursts in the middle of the night. Pair any robot or actuator with leak sensors at the water heater, washing machine, and under sinks, and set the automation so a wet sensor closes the valve without waiting for you to see a phone alert.

Installation effort. Moen recommends professional installation for the Flo, and many homeowners will want a plumber for any inline device. The four retrofit picks are realistic do-it-yourself jobs with basic hand tools, as long as your existing valve matches the fit ranges above.

FAQ

Do smart water shutoff valves work when the internet goes down?

Mostly, yes, for the core job. Z-Wave actuators take their commands from a local hub, and the Zooz Titan can even close from its own wired leak probe with no hub involved. YoLink sensors can pair directly with the valve controller for offline shutoff. Cloud features, phone alerts, and usage history do pause until the connection returns, and Wi-Fi-only automations are the most exposed.

Can I install a smart shutoff valve myself?

The clamp-on designs here are built for self-installation: they mount over an existing ball valve with basic tools and no pipe cutting. Inline monitors such as the Moen Flo require cutting into the water line, and Moen recommends professional installation. If your shutoff is a gate valve rather than a ball valve, that replacement is also a plumber job.

Will a valve robot work on any main shutoff?

No. Valve robots only fit quarter-turn ball valves with lever handles, and each model covers a specific size range, from 1/2 inch up to 1-1/2 inches on the widest-fitting picks. They also need clearance around the valve for the motor body and a nearby power outlet. Check the fit range and your available space before ordering.

Do these valves require a subscription?

The five picks here do not require a subscription for shutoff control and alerts through their own apps or hubs. What you do need is the right hub where noted: a Z-Wave controller for the Zooz, EcoNet, and Dome units, and a YoLink Hub for the YoLink controller. Optional cloud extras vary by brand, so check the listing for the current terms before buying.

Conclusion

Start with your plumbing. If you can accept an inline installation and want detection and shutoff in one device, the Moen Flo is the most complete answer. If your existing ball valve is in good shape and you would rather not cut pipe, pick your radio: the YoLink controller for extreme range, the Zooz Titan for a self-contained Z-Wave actuator with its own leak probe, the EcoNet Bulldog for larger valves, and the Dome unit for a simple, budget-friendly Z-Wave retrofit. Any of the five turns a leak from a disaster into a cleanup, which is the entire point of putting a motor on your main line.

Check price on Amazon

T
TechVentureSpot Editorial Team
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best Smart Water Shutoff Valves: 5 Picks to…Check price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free
Prime for Young Adults

A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

See Prime for Young Adults
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free

As an Amazon Associate we earn from qualifying purchases.